Technical Parameters:
Name: Air-cooled Corona Tube 30g/hr quartz ozone tube sets(ozone tube+power supply)
Model:OT-30GC
Working voltage:AC220V/50Hz, AC110V/60Hz(custom)
Power consumption: 15~250W adjust
When AC220V/50Hz voltage, the max current is about 1.2A
Ai source: dry and clean oxygen or air
Ozone output:90% oxygen flow,when 7-10L/min,ozone output is ≥30G/hr
Highest ozone concentration: 145mg/L
Working temperature:-10~45ºC(the best working temperature is 10-25ºC)
Humidity: ≤80% RH relative humidity
Dimensions: ozone tube 338*118*100mm Power 204 *136 *100mm
Net weight: 3.6kg
Product Structure Description:
- Dual air-cooled Corona Tube 30g/hr quartz ozone tube sets is include high voltage power supply and quartz ozone tube.The characteristics of dual air-cooled quartz ozone tube: inner and outer electrode both have heat sink, heat dissipation area is large, and get excellent cooling effect, dielectric material is 99.8% silica quartz tube, the sealing parts is PTFE and fluorine rubber. Gas nozzle use 8mm inner diameter fluorine rubber tube.
The main feature of quartz ozone tube have high dielectric permittivity values, not easily damaged when transportation, the thermal expansion coefficient is low, the air source max pressure is 0.2Mpa, the normal using life is about 12000 hours.
3. The characteristics of high voltage power supply: Include variable frequency PCB electric circuit and vacuum epoxy FBT
The main feature is IGBT driver, bandwidth auto/manual, slow start(Limit inrush current), overvoltage protection, power converter overheat protection, output short circuit, circuit protection, sound and light alarm, circuit anti jamming, moisture proof and anticorrosion design, as different customer request, to provide PLC controller or custom voltage, the normal using life is more than 8000 hours.
- The spare parts of the high voltage power supply:
a. Potentiometer: the main function is adjust the output power of the power supply, then change the ozone concentration and ozone output, Clockwise is adjust large, counterclockwise is adjust small.
b. High voltage line and high voltage ground line: high voltage line is 5mm
white silicone wire, the high
voltage is yellow and green wire from the PCB circuit board, wiring the
terminal to the ozone heat sink, According to this method, there are no high
voltage on the ozone tube surface, it's the safe way to install.
c. power terminal: two pieces wire cores and one piece plastic wiring plug,
welding the power supply line, then inserted into the socket on the PCB
circuit board.
Equipment use instructions
OT-30GC quartz ozone tube sets is used in 30g/hr high ozone concentration ozone generator, it can use one set for one machine, or several sets for one set, it's the main parts of the ozone generator, air source can be oxygen source or air, can be used in the need for ozone sterilization or purification, the general use is water treatment, get very good feedback from customer.
Technical Parameters:
){kind=link}